(sed.info)Reporting Bugs
10 Reporting Bugs
*****************
Email bug reports to <bug-sed@gnu.org>. Also, please include the output
of 'sed --version' in the body of your report if at all possible.
Please do not send a bug report like this:
while building frobme-1.3.4
$ configure
error-> sed: file sedscr line 1: Unknown option to 's'
If GNU 'sed' doesn't configure your favorite package, take a few
extra minutes to identify the specific problem and make a stand-alone
test case. Unlike other programs such as C compilers, making such test
cases for 'sed' is quite simple.
A stand-alone test case includes all the data necessary to perform
the test, and the specific invocation of 'sed' that causes the problem.
The smaller a stand-alone test case is, the better. A test case should
not involve something as far removed from 'sed' as "try to configure
frobme-1.3.4". Yes, that is in principle enough information to look for
the bug, but that is not a very practical prospect.
Here are a few commonly reported bugs that are not bugs.
'N' command on the last line
Most versions of 'sed' exit without printing anything when the 'N'
command is issued on the last line of a file. GNU 'sed' prints
pattern space before exiting unless of course the '-n' command
switch has been specified. This choice is by design.
Default behavior (gnu extension, non-POSIX conforming):
$ seq 3 | sed N
1
2
3
To force POSIX-conforming behavior:
$ seq 3 | sed --posix N
1
2
For example, the behavior of
sed N foo bar
would depend on whether foo has an even or an odd number of
lines(1). Or, when writing a script to read the next few lines
following a pattern match, traditional implementations of 'sed'
would force you to write something like
/foo/{ $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N }
instead of just
/foo/{ N;N;N;N;N;N;N;N;N; }
In any case, the simplest workaround is to use '$d;N' in scripts
that rely on the traditional behavior, or to set the
'POSIXLY_CORRECT' variable to a non-empty value.
Regex syntax clashes (problems with backslashes)
'sed' uses the POSIX basic regular expression syntax. According to
the standard, the meaning of some escape sequences is undefined in
this syntax; notable in the case of 'sed' are '\|', '\+', '\?',
'\`', '\'', '\<', '\>', '\b', '\B', '\w', and '\W'.
As in all GNU programs that use POSIX basic regular expressions,
'sed' interprets these escape sequences as special characters. So,
'x\+' matches one or more occurrences of 'x'. 'abc\|def' matches
either 'abc' or 'def'.
This syntax may cause problems when running scripts written for
other 'sed's. Some 'sed' programs have been written with the
assumption that '\|' and '\+' match the literal characters '|' and
'+'. Such scripts must be modified by removing the spurious
backslashes if they are to be used with modern implementations of
'sed', like GNU 'sed'.
On the other hand, some scripts use s|abc\|def||g to remove
occurrences of _either_ 'abc' or 'def'. While this worked until
'sed' 4.0.x, newer versions interpret this as removing the string
'abc|def'. This is again undefined behavior according to POSIX,
and this interpretation is arguably more robust: older 'sed's, for
example, required that the regex matcher parsed '\/' as '/' in the
common case of escaping a slash, which is again undefined behavior;
the new behavior avoids this, and this is good because the regex
matcher is only partially under our control.
In addition, this version of 'sed' supports several escape
characters (some of which are multi-character) to insert
non-printable characters in scripts ('\a', '\c', '\d', '\o', '\r',
'\t', '\v', '\x'). These can cause similar problems with scripts
written for other 'sed's.
'-i' clobbers read-only files
In short, 'sed -i' will let you delete the contents of a read-only
file, and in general the '-i' option (Note: Invocation.
) lets you clobber protected files. This is not a bug, but
rather a consequence of how the Unix file system works.
The permissions on a file say what can happen to the data in that
file, while the permissions on a directory say what can happen to
the list of files in that directory. 'sed -i' will not ever open
for writing a file that is already on disk. Rather, it will work
on a temporary file that is finally renamed to the original name:
if you rename or delete files, you're actually modifying the
contents of the directory, so the operation depends on the
permissions of the directory, not of the file. For this same
reason, 'sed' does not let you use '-i' on a writable file in a
read-only directory, and will break hard or symbolic links when
'-i' is used on such a file.
'0a' does not work (gives an error)
There is no line 0. 0 is a special address that is only used to
treat addresses like '0,/RE/' as active when the script starts: if
you write '1,/abc/d' and the first line includes the word 'abc',
then that match would be ignored because address ranges must span
at least two lines (barring the end of the file); but what you
probably wanted is to delete every line up to the first one
including 'abc', and this is obtained with '0,/abc/d'.
'[a-z]' is case insensitive
You are encountering problems with locales. POSIX mandates that
'[a-z]' uses the current locale's collation order - in C parlance,
that means using 'strcoll(3)' instead of 'strcmp(3)'. Some locales
have a case-insensitive collation order, others don't.
Another problem is that '[a-z]' tries to use collation symbols.
This only happens if you are on the GNU system, using GNU libc's
regular expression matcher instead of compiling the one supplied
with GNU sed. In a Danish locale, for example, the regular
expression '^[a-z]$' matches the string 'aa', because this is a
single collating symbol that comes after 'a' and before 'b'; 'll'
behaves similarly in Spanish locales, or 'ij' in Dutch locales.
To work around these problems, which may cause bugs in shell
scripts, set the 'LC_COLLATE' and 'LC_CTYPE' environment variables
to 'C'.
's/.*//' does not clear pattern space
This happens if your input stream includes invalid multibyte
sequences. POSIX mandates that such sequences are _not_ matched by
'.', so that 's/.*//' will not clear pattern space as you would
expect. In fact, there is no way to clear sed's buffers in the
middle of the script in most multibyte locales (including UTF-8
locales). For this reason, GNU 'sed' provides a 'z' command (for
'zap') as an extension.
To work around these problems, which may cause bugs in shell
scripts, set the 'LC_COLLATE' and 'LC_CTYPE' environment variables
to 'C'.
---------- Footnotes ----------
(1) which is the actual "bug" that prompted the change in behavior
automatically generated by info2www version 1.2.2.9